GDL

Modelling on Tracking Test Condition of Polymer Nanocomposite using Finite Element Simulation

Journal from gdlhub / 2016-11-16 03:22:11
Oleh : Fatin Liyana Muhamedin, M. A. M. Piah, Nordiana Azlin Othman, Telkomnika
Dibuat : 2015-12-01, dengan 1 file

Keyword : Finite Element Method; electric field; current density; surface discharges ; IEC 60587
Url : http://journal.uad.ac.id/index.php/TELKOMNIKA/article/view/2362

Electrical tracking is a formation process of a permanent conducting path across the insulating material due to surface erosion under high voltage stress. The existing of leakage current (LC) on the wet contaminated material surface causes the generation of surface discharges that resulted in the material degradation. The effects of electric field distribution and current density on LLDPE-Natural Rubber blends material were investigated using finite element method (FEM) analysis. In this paper, a variety of physical parameters particularly contaminant flow rate, various applied voltages, material properties of permittivity and conductivity were studied when nanofiller is added to LLDPE-Natural rubber blend. The simulation works using FEM software of Quickfield was applied to the tracking test condition of IEC 60587 standard. The results show that the electric field distributions are critical on the edges of contaminant solution path at higher voltage level. The current density and electric field distribution is increase with higher applied voltage. The polymer nanocomposite with 1-5 % of nanofiller exhibits a good resistance to tracking and erosion test.

Deskripsi Alternatif :

Electrical tracking is a formation process of a permanent conducting path across the insulating material due to surface erosion under high voltage stress. The existing of leakage current (LC) on the wet contaminated material surface causes the generation of surface discharges that resulted in the material degradation. The effects of electric field distribution and current density on LLDPE-Natural Rubber blends material were investigated using finite element method (FEM) analysis. In this paper, a variety of physical parameters particularly contaminant flow rate, various applied voltages, material properties of permittivity and conductivity were studied when nanofiller is added to LLDPE-Natural rubber blend. The simulation works using FEM software of Quickfield was applied to the tracking test condition of IEC 60587 standard. The results show that the electric field distributions are critical on the edges of contaminant solution path at higher voltage level. The current density and electric field distribution is increase with higher applied voltage. The polymer nanocomposite with 1-5 % of nanofiller exhibits a good resistance to tracking and erosion test.

Beri Komentar ?#(0) | Bookmark

Properti	Nilai Properti
ID Publisher	gdlhub
Organisasi	Telkomnika
Nama Kontak	Herti Yani, S.Kom
Alamat	Jln. Jenderal Sudirman
Kota	Jambi
Daerah	Jambi
Negara	Indonesia
Telepon	0741-35095
Fax	0741-35093
E-mail Administrator	elibrarystikom@gmail.com
E-mail CKO	elibrarystikom@gmail.com