GDL

Journal from gdlhub / 2021-01-20 15:18:14
Oleh : Eka Putra Waldi, Asri Indah Lestari, Rudy Fernandez, Syaifa Mulyadi, Yoshinobu Murakami, Naohiro Hozumi, Telkomnika
Dibuat : 2021-01-13, dengan 1 file

Keyword : back wire; digitalization; linearity; partial discharge; rogowski Sensor;
Url : http://journal.uad.ac.id/index.php/TELKOMNIKA/article/view/14282
Sumber pengambilan dokumen : web

This paper presents the construction of a Rogowski Coil sensor with an air core to detect partial discharge using a digital oscilloscope. Two types of sensors are used. The first is the primary sensor winding with back wire, and the second is without back wire, labeled BW and WBW, respectively. The numbers of primary-turn in the sensors are 5, 10, 20, and 40 turns. The performance of the sensors is tested using two types of tests. First, the wave response test with a fixed imitation partial discharge magnitude input is used to select the optimum sensitivity with the lower sampling rate, aims to select the peak or valley value as a magnitude partial discharge value. The second test is using an imitation partial discharge ramp to check the linearity of the sensors. The imitation of the partial discharge inputs is generated by a commercial charge calibrator. The wave response test results show an increase in the number of turns that corresponds to an increase of the sensor output for both sensors in a non-linear trend. In determining the sampling rate, the detection of magnitude in the valley is better than the peak. All sensors act linear toward the imitation partial discharge ramp either in BW or WBW conditions.

Beri Komentar ?#(0) | Bookmark

Properti	Nilai Properti
ID Publisher	gdlhub
Organisasi	Telkomnika
Nama Kontak	Herti Yani, S.Kom
Alamat	Jln. Jenderal Sudirman
Kota	Jambi
Daerah	Jambi
Negara	Indonesia
Telepon	0741-35095
Fax	0741-35093
E-mail Administrator	elibrarystikom@gmail.com
E-mail CKO	elibrarystikom@gmail.com